tsdecrypt/tsdecrypt.1

.TH TSDECRYPT "1" "November 2011" "tsdecrypt 4.0" "User Commands"
.SH NAME
tsdecrypt - Decrypt mpeg transport stream.
.SH SYNOPSIS
.B tsdecrypt
[\fIoptions\fR]
.SH DESCRIPTION
tsdecrypt reads incoming mpeg transport stream over UDP/RTP or file and
then decrypts it using libdvbcsa and keys obtained from OSCAM or similar
CAMD server. tsdecrypt communicates with CAM server using cs378x (camd35
over tcp) protocol or newcamd protocol.
.SH OPTIONS
.TP
.SH MAIN OPTIONS
.PP
.TP
\fB\-i\fR, \fB\-\-ident\fR <ident>
Set ident that will be used when logging to syslog. The prefered format
for the ident is PROVIDER/CHANNEL.
.TP
\fB\-d\fR, \fB\-\-daemon\fR <pidfile>
When started become a daemon and write pid file to <pidfile>.
.TP
\fB\-N\fR, \fB\-\-notify\-program\fR <program>
Execute \fB<program>\fR when predefined events happen. In order for
this option to work \fB\-\-ident\fR should also be used.

You can use \fBnotify-script.example\fR file as notification program
and an example on how to create your own notification script.

See \fBEVENTS\fR section for detailed description of the events.
.TP
\fB\-S\fR, \fB\-\-syslog\fR
Write log messages to local syslog.
.TP
\fB\-l\fR, \fB\-\-syslog\-host\fR <addr>
Set syslog host. tsdecrypt sends messages to this host over tcp in
syslog compatible format. syslog-ng was tested as receiving syslog server.
.TP
\fB\-L\fR, \fB\-\-syslog\-port\fR <port>
Syslog server port. The default value is \fB514\fR.
.TP
\fB\-D\fR, \fB\-\-debug\fR <level>
Set message debug level. Currently there are five message levels.
0 = default messages, 1 = show PSI tables, 2 = show EMMs 3 = show
duplicate ECMs, 4 = packet debug. 5 = packet debug + mpeg ts packet
dump.
Setting higher level enables the levels bellow.
.TP
\fB\-b\fR, \fB\-\-bench\fR
Bechmark libdvbcsa decryption. The benchmark is single threaded.
If you want to fully test your CPU, run couple of tsdecrypts in parallel.
.TP
\fB\-V\fR, \fB\-\-version\fR
Show program version.
.TP
\fB\-h\fR, \fB\-\-help\fR
Show program help.
.TP
.SH INPUT OPTIONS
.PP
.TP
\fB\-I\fR, \fB\-\-input\fR <source>
Where to read from. tsdecrypt supports input from files (-I file.ts or -I -)
or multicast (-I 224.0.0.1:5000). By default tsdecrypt reads from \fBstdin\fR.
.TP
\fB\-R\fR, \fB\-\-input\-rtp\fR
When reading from multicast assume the input is RTP stream. NOTE: No RTP
processing/reordering of packets is done. The 12 byte RTP header is just
stripped out and the stream is then processed as normal mpeg transport
stream over UDP multicast.
.TP
\fB\-z\fR, \fB\-\-input\-ignore\-disc\fR
Do not report input discontinuity or RTP discontinuity errors.
.TP
\fB\-M\fR, \fB\-\-input\-service\fR <service_id>
Choose the service id. This option must be used when the input is MPTS
in order to select the correct service (program). If the input is MPTS
and \fB\-\-input\-service\fR is not used, tsdecrypt chooses the last service
listed in PAT.
.TP
.SH OUTPUT OPTIONS
.PP
.TP
\fB\-O\fR, \fB\-\-output\fR <dest>
Output decrypted stream to <dest>. Destination can be multicast address
(-O 239.0.0.1:5000) or a file (-O file.ts). The default output is \fBstdout\fR.
.TP
\fB\-o\fR, \fB\-\-output\-intf\fR <addr>
Set multicast output interface.
.TP
\fB\-t\fR, \fB\-\-output\-ttl\fR
Set multicast ttl. The default value is \fB1\fR.
.TP
\fB\-p\fR, \fB\-\-output\-filter\fR
Enable output filtering. When output filter is enabled only PAT/PMT/SDT
and data packets are left in the output. Everything else not mentioned
in PMT like NIT, EIT, TDT tables and unknown pids is removed.
.TP
\fB\-y\fR, \fB\-\-output\-nit\-pass\fR
Pass throught NIT packets when output filtering is enabled.
.TP
\fB\-w\fR, \fB\-\-output\-eit\-pass\fR
Pass throught EIT (EPG) packets when output filtering is enabled.
.TP
\fB\-x\fR, \fB\-\-output\-tdt\-pass\fR
Pass throught TDT/TOT packets when output filtering is enabled.
.TP
.SH CA OPTIONS
.PP
.TP
\fB\-c\fR, \fB\-\-ca\-system\fR <ca_sys>
Process input EMM/ECM from <ca_sys>. Currently tested and working CA systems
are \fBCONAX\fR, \fBCRYPTOWORKS\fR, \fBIRDETO\fR, \fBVIACCESS\fR, \fBMEDIAGUARD\fR
(\fBSECA\fR) and \fBVIDEOGUARD\fR (\fBNDS\fR). Other supported CA systems that
you can choose but are not tested are \fBNAGRA\fR and \fBDRECRYPT\fR.
The default <ca_sys> is \fBCONAX\fR.
.TP
\fB\-C\fR, \fB\-\-caid\fR <caid>
Directly set CAID. This is useful if you have couple of CA streams from
one CA but with different CAIDs.
.TP
.SH CAMD OPTIONS
.PP
.TP
\fB\-A\fR, \fB\-\-camd\-proto\fR <protocol>
Set CAMD server protocol. Valid protocols are \fBCS378X\fR and \fBNEWCAMD\fR.
If this option is not used the default protocol is \fBCS378X\fR (camd35 over
tcp).
.TP
\fB\-s\fR, \fB\-\-camd\-server\fR <addr[:port]>
Set CAMD server ip and port (10.0.1.1:2233). Is not set default port
is \fB2233\fR. 2233 is the default port CS378X protocol, for NEWCAMD
protocol you probably should choose other port.
.TP
\fB\-U\fR, \fB\-\-camd\-user\fR <username>
Set CAMD user name. The default is \fBuser\fR.
.TP
\fB\-P\fR, \fB\-\-camd\-pass\fR <password>
Set CAMD user password. The default is \fBpass\fR.
.TP
\fB\-B\fR, \fB\-\-camd\-des\-key\fR <des_key>
Set DES key used by NEWCAMD protocol. The default
is \fB0102030405060708091011121314\fR.
.TP
.SH EMM OPTIONS
.PP
.TP
\fB\-e\fR, \fB\-\-emm\fR
Enable sending EMM's to CAMD for processing. By default EMM processing
is \fBdisabled\fR and only ECM are processed.
.TP
\fB\-Z\fR, \fB\-\-emm\-pid\fR <pid>
Set EMM pid manually. This option is useful for services that have
couple of EMM streams from one CA system. Without this option tsdecrypt
always chooses the first stream from the chosen CA system.
.TP
\fB\-E\fR, \fB\-\-emm\-only\fR <hierarchy>
Disable ECM processing and stream output. This option is useful if the EMM
stream has very high rate and is interfering with ECM processing. Using
--emm-only you can run special tsdecrypt dedicated only to card auto update.
.TP
\fB\-f\fR, \fB\-\-emm\-report\-time\fR <seconds>
Set interval for EMM reports. The default is \fB60\fR seconds. Set to \fB0\fR
to disable EMM reports.
.TP
.SH ECM OPTIONS
.PP
.TP
\fB\-X\fR, \fB\-\-ecm\-pid\fR <pid>
Set ECM pid manually. This option is useful for services that have
couple of ECM streams from one CA system. Without this option tsdecrypt
always chooses the first stream from the chosen CA system. Run tsdecrypt
with --debug 2 and look at CA descriptors in PMT to see what CA streams
are available.
.TP
\fB\-H\fR, \fB\-\-ecm\-report\-time\fR <seconds>
Set interval for ECM reports. The default is \fB60\fR seconds. Set to \fB0\fR
to disable ECM reports.
.TP
\fB\-G\fR, \fB\-\-ecm\-irdeto\-type\fR <type>
Set ECM IRDETO type. IRDETO CA send ECMs with different id mixed
into one stream. Only one of the IDs are valid in given time. This
option lets you choose which stream to process. The default stream
type is \fB0\fR.
.TP
\fB\-K\fR, \fB\-\-ecm\-no\-log\fR
Disable logging of ECMs and code words. Code word errors and stats
reports are not affected by this option.
.TP
\fB\-J\fR, \fB\-\-cw\-warn\-time\fR <seconds>
After how much seconds to warn if valid code word was not received.
The default is \fB20\fR seconds. Set to \fB0\fR to disable the warning.
.SH EVENTS
Notification events are sent when \fB\-\-notify\-program\fR and \fB\-\-ident\fR
options are used. The event parameters are set as environmental variables
before executing the external notification program. The variables are:

  \fB_TS\fR             Unix timestamp of the event.
  \fB_IDENT\fR          tsdecrypt ident parameter with "/" replaced by "-".
  \fB_MESSAGE_ID\fR     Event message id (for example START, STOP, etc...).
  \fB_MESSAGE_MSG\fR    Event message id with "_" replaced by " ".
  \fB_MESSAGE_TEXT\fR   Event message text. Human readable event message.

currently defined events are:

  \fBSTART\fR           tsdecrypt was started.

  \fBCODE_WORD_OK\fR    Valid code word was received and decryption is
                  working ok.

  \fBNO_CODE_WORD\fR    No valid code word was received for X seconds. The
                  decryption process have been suspended until valid
                  code word is received.

  \fBINPUT_TIMEOUT\fR   There was no data on the input.

  \fBINPUT_OK\fR        The data have appeared on the input.

  \fBSTOP\fR            tsdecrypt was stopped.

See \fBnotify-script.example\fR for an example on how to create external
notification program.
.SH SEE ALSO
See the README file for more information. If you have questions, remarks,
problems or you just want to contact the developer, write to:
  \fIgeorgi@unixsol.org\fP
.TP
For more info, see the website at
.I http://georgi.unixsol.org/programs/tsdecrypt/
.SH AUTHORS
Written by Georgi Chorbadzhiyski <\fBgeorgi@unixsol.org\fR>
.SH LICENSE
This program is free software; you can redistribute it and/or modify it under
the terms of version 2 of the GNU General Public License as published by the
Free Software Foundation.